Version 3.68 ==> 3.70
~~~~~~~~~~~~~~~~~~

  - TelMemPlus now is "Donationware". That means, development, publishement and support
     is financed by voluntarily donations. There is no fixed price as in shareware.
  - No more registration is needed. TelMemPlus is no longer limited in time of use.
  - Cell data base for "Where am I?" function had been updated with additional German locations
  - Improved Hotkey Tool. Now TelMemPlus is able to set all possible functions at
     the shortcut keys, even by using new mobiles like the my X-6.
  - Tool for changing the operator logo is improved.
  - Overview mode improved: Copying and moving of blocks now supports overlapping source
     and destination entries. So you can move all entries from position 50 till 75 to position
     60 till 85, for example.
  - Support of phones with large diectories for editiong. Previous versions of TelMemPlus
     stopped working if the mobile's directory was too large.
  - Some little improvements in the EEPROM Backup Tool.
  - Bugfix: "Test connection" from teh basic settings failed to work if the selected COM
     port was greater than COM 4. Fixed.
  - Some pictures of the my X-6 and my V-65 added
  - F.A.Q. upgedated

Version 3.66 ==> 3.68
~~~~~~~~~~~~~~~~~~

  - PromEdit tool now offers a new feature which allows you to copy fields (available in advanced mode only)
  - (Advanced mode) EEPROM/Flash Backup and Restore tools are updated for use with new firmware
     realeses. Access protected fields were diagnosted and skipped, otherwise TelMem would get timeout
     status because of missing response.
  - Activation of Service Menu III (advanced mode) now also works with several new firmware releases
  - Cell data base for "Where am I?" function had been updated with additional German locations
  - In basic settings (connection settings) now you can choose between 18 pictures of mobiles
     including newer models. This pictures are stored into JPeg files, so it's easier to personalisize them.
  - The "Wake up" routine for timeouts has been improved a bit.
  - TelMemPlus now supports aditional COM ports (COM5..COM9) for connecting the mobile.
  - keypad lock will be removed before sending keystrokes to phone, if necessary.
  - Some little corrections, most of them are made in SMS Archiv Management

Version 3.6 ==> 3.66
~~~~~~~~~~~~~~~~~

GENERAL:
BUGFIXES:
  - "Send SMS" is chooseable from main menu. Version 3.6 just showed an error message and stopped.
  - By sending a SMS, it is possible to catch the recipient number from saved overview file.
     But a "+" in phone number had not been transfered in previous releases. Fixed.

DIRECTORY + SMS:
  - In overview mode now it's possible to scroll with cursor keys and to write entries by pressing enter.
  - New tool for viewing memory status of Phone directory and SMS.
  - By reading and exporting SMS, name of sender appears beside the sender number.
  - Accelerated reading of SMSshort messages.
  - Improoved support for special characters by sending, saving and reading SMS.
  - New option for requesting an receipt (if supported by message service)
  - Optional PDU mode for transmitting SMS data to mobile.

GENERAL:
  - TelMemPlus now starts a bit faster than in previous versions
  - Option form contains more settings which are viewed more openly.
  - User defined EEPROM/Falsh backup, up to 10 regions can be difined
  - Setting date and time: Procedure accelerated by using an AT command thatfor, old mobiles which
     don't support this command, are handled like before.
  - Auto detection for number of total SMS and directory entries storable in phone and at SIM card.
     (the values needn't to be entred manualy by using a tuned or not-listed phone)
  - Data cable connection: Integred "Wake up" feature to get rid of timeouts
     (has no effect after mobile switched it's interface completly off)
  - the "Test Ringtones" form had been extended with melody names of new Sagems
  - Some more little improvements
  - F.A.Q. updated

Version 3.41 ==> 3.5
~~~~~~~~~~~~~~~~~

GENERAL:
- Improved data cable connection
   - Automatic detect of baudrate setted at the phone
   - Support of higher baudrates (57600 and 115200 bps) if phone offers this speed
   - Faster connecting process
- TelMemPlus will run with Microsoft Windows XP correctly.
   In Version 3.5 problems with serial number generation may appear by running under Windows XP.
- Improved support of non-listed Sagem phones (General Sagem settings)
- Better viewed F.A.Q.

ADVANCED FEATURES:
- Long-Flash-Fields-Support
   - By creating a backup, fields with excess length will be saved, too
   - RingToneTranser is able to transfer long ringing tones, irrespective of number of notes
   - Of course you also can read, edit and rewrite long flash fields manualy using the PromEdit tool.
-  Improved PromEdit tool with more comfort by editing hex values.
   In prom area (lower field numbers than 1024) each field can be resized or deleted now.
-  New Tool for adjusting and tuning maximum values of ringing tone and loudspeaker volume
-  Now Tuning module is open for all firmware releases. If phone is not supported for checksum update,
   a warning message will appear. This will make possible to tune phones with inactiv checksum protection.

MISC:
- Partly new disigned main window, more open button for settings in TelMemPlus
- Screen Resolution selection for TelMemPlus (menu Settings/Screen Mode)
- Name of registred user is shown in 'About' window
- Some more not worth mentioning changes
- Fixed some translation mistakes (English version only)
- Some logos added

Version 3.41 ==> 3.5
~~~~~~~~~~~~~~~~~

GENERAL
 - Improved I/O sub routine for sending data cable commands to phone, this will cause...
   - faster reading of short messages, phone directory entries and so on.
   - higher reliability by great i/o traffic, for example by making an EEPROM backup
  - Advanced features wich were disigned for experts, are hideable. (Safety mode)
    This is useful for those, who use TelMemPlus for phone directory and SMS management only.
  - improved I/O Monitor including optional log file
  - improved console for sending AT Commandos direclty to mibile phone

PHONE DIRECTORY + SMS:
  - You are able to add all messages you read from phone to an archive at one time.
  - Also it's possible to delete all messages from SIM card and phone memory at one time.
  - After exporting SMS or phone directory entries, the result is viewed by a text viewer.

LOGO EDITIOR:
  - More default StartUp and Power-off Logos
  - New rename and copy buttons in 'Load Logo' menu
  - BUGFIX: By fast scrolling in logo range (Load Logo) TelMemPlus stopped working. Fixed.

Version 3.4 ==> 3.41
~~~~~~~~~~~~~~~~~

IMPROVEMENTS:
- The Hotkey Tools is extendet with two features: "Quick dial" and "Call voice mail"
  including definition of directory entries for Quick dial keys.
- I/O Monitor: Viewing the log file in default text editor now also works at Windows 2000.
- Added MW930 (beside MC930) in the list of supported mobile phones.

BUGFIXES:
- Hotkey Tool: An error appeared by not adjusting the first hotkey. Fixed.
- SMS Export: TelMemPlus failed to extand existing files by exporting SMS. The checkbox
  "append to existing file" had no meaning. Fixed.
- Setting date and time only worked if all three hotkeys are setted to any function by TelMemPlus.
  This is fixed using automatic recognotion of menu 5-5-1 / 5-6-1.

Version 3.3 ==> 3.4
~~~~~~~~~~~~~~~~

- Phone directory: Copy, move and delete features for whoole blocks, this will be usefull by moving
  SIM contense to phone for example.
- The Power-On-Message Editor can also be used for editing Power-Off-Messages
- new Tool for adjusting phone's hotkey functions, even the W@P-key (MW 9xx) is adjustable
- Storing short messages into phone is possible now
- Reading Phonecode: Recognition of inactiv phonecode added
- SMS-Archiv: Duplicated check by adding a message to an archiv.
  This will prevent duplicated messages in the same archiv.
- Bugfix: By leaving the SMS main window by closing the window (not using the button), next command
  causes reading SMS. This is quite pointless and has been removed.
- Support of SIM cards with more than 10 entries for short messages
- Logo-Editor: Buttons added for removing Power-On- and Power-Off-Logos from phone
- Tuning: Improved auto backup feature. This will increase the chance for succesful 'Undoing Tuning'.
- HighScore Editor: Now it is possible to delete existing HighScores.
- The Keypad Tool (for remote control of the mobile) got new function keys,
   for example the cursor keys are accepted now.
- The Display Window now appears 'always on top'
- Support of several firmware releases for date/time setting
- Some Error Dialogs had been extended to enable complete abort (f.e. by reading entries from phone)

Version 3.22 ==> 3.25
~~~~~~~~~~~~~~~~~~

- New feature which allowes you to edit the operator logo (text) shown in the display. (Menu TrickBox)
- Overview mode: Writing phone directory entries which were empty before is possible now.
- Import/Export module: If the last used path is no longer available, the current directory is shown.
  (In previous versions a runtime error forces program termination)
- Bugfixes:
  - The search option in overview mode failed jumping to found entry if it's part
    of the other memory area (Sim/phone) as which is currently shown. Fixed.
  - Not all messages are viewed clicking the "Next"-Button by reading SMS. Fixed.
- free registration added

Version 3.2 ==> 3.22
~~~~~~~~~~~~~~~~~~

- Now it is possible to remove the simlock using TelMemPlus (Menu Tools/Simlock/remove)
- For tuning phone's memory, additional software isn't required anymore (Menu TrickBox/Phone Tuning)
- Warning message appears by tuning of not supported firmware releases.
- Checksum calculation and correction for protected flash fields (Menu TrickBox/Checksum Correction)
- Better recognition of firmware release (by using hexadecimal and AT commando).
- Phone I/O monitor, shows data send to and received from mobile phone
- In previous versions you didn't saw the whool text output if it was containing an  ASCII character
   of value zero. Fixed.
- FAQ updated

Version 3.1 ==> 3.2
~~~~~~~~~~~~~~~~

- Complete translation of German version, now TelMemPlus also is available in English
- Password protection, it automaticly encrypts user files and will ask for your password at start-up (Menu File)
- New feature which helps you to tune up the available memory of your MC930/MC939 (or compatible)
- Support of tuned Sagem phones, especially MC930/MC939
- Better COM-Port error handling, for example if phone stops answering,
  TelMemPlus will recognize this immediatly and will offer you a 'retry' option
- Fixed the bug that blocked the 'Export' button by reading SMS.
- Time for announcement of Prepaid credit increased.
- Optional checker board test screeen is shown while TelMemPlus runs,
   this should help to reduce time outs by some phones.
- Start-up accelerated, especially at slow mashines the first window appears more quickly now.
- Scroll bar added to SMS text box, this allows you to read SMS containing many line feeds
- Warning message appears if TelMemPlus is started in second instance
- New names for ini-files (old files are accepted and renamed automaticly)
- Version information in 'About' menu is more useful now.
- New colours in main window, overview mode and for SMS managing
- FAQ updated and viewed in a better sized window
- A lot of little improvments

Version 3.0 ==> 3.1
~~~~~~~~~~~~~~~~

NEU FEATURES:
  - Display-Film-Recorder (Record and playback of display movements) (Menu Communication)
  - Creating of RAM Images (Menu TrickBox)
  - Now user can send data cable commands using TelMemPlus (Menu Communication)
  - Contrast setting for phons's display (Menu Tools)
  - Test of display and LEDs by using the default test pictures (Menu Tools)
  - Temporary remove of the Letter-Logo that appears if you got SMS (depanding on FW-release, Menu SMS)
  - Temporary extension of SMS memory for most MC930/MC939/MW939 (Menu SMS)

IMPROVEMENTS:
  - Support of more FW releases for Display Monitoring
  - Phone's Service Menu III can be activated permanently, too.
  - Cell ID database for "Where am I?"-feature expanded
  - Some buttons in main window get sub buttons if you 'touch' them with the mouse pointer
  - Activating build-in modem: Support of FW4,0E added
  - Windows Clipboard support for FAQ, Internetlinks, etc

BUGFIXES:
  - Sending AT-Command/Reading EEPROM: First command after connection to COM port sometimes
    causes bad respondering on some phones. Fixed.
  - Phone Directory: By using "Open Overview" TelMemPlus told you that no
    saved overview file exists, if there was exact one. Fixed.

Version 2.9 ==> 3.0
~~~~~~~~~~~~~~~~

NEW FEATURES (GENERAL):
  - Display Monitoring in a scaleable window, several colour pattern, automatic FW detection.
    Support of most firmware releases (Menu Communication)
  - "Where am I?"-feature (Location of network cell) (Menu TrickBox)
  - Power-On-Message Editor for both lines (Menu TrickBox)
  - RingToneTransfer (creats images of persolalised rining tones (Menu TrickBox/Ring Tones)
  - Activate and remove of the "Hardware failure"-Barrier (Menu TrickBox)
  - HighScore Manipulator for build-in games (Menu TrickBox and Games)
  - Provider shown in display temporäry adjustable (depanding on FW release) (Menu Tools/GSM codes)
  - Test of rining tones and vibration call. (Menü TrickBox/Ring Tones)
  - Display currect phone codes (Menü TrickBox)

NEW FEATURES FOR PROFI USER:
  - Backup and restore of EEPROM content (Menu TrickBox/EEPROM-Backup)
    - Automatic flash field update for QuickBackup.
    - Areas for phone directory, SMS and personalised rining tones are skipable
  - Editor for EEPROM/flash fields and RAM-contents (Menu TrickBox)
  - Activation of phone's Service Menu III (Menu TrickBox)

IMPROVEMENTS:
  - Support of 38400 bps! The speed is set automaticly if you want so.
    This accelerate reading phone directory, SMS, etc.
  - Keypad window out of Macro Editor, too (Menu Communication)
  - Activating build-in modem: Faster, Support of more FW releases.
    Reduce of baudrate is no longer necesary. (Menu Communication)
  - Getting IMEI even if phone doesn't support the AT command for that.
  - Displaying date of production and battery voltage (Menu Communication/Display Info...)
  - In Addition IMSI of your SIM card is shown there.
  - Reset feature added (resets phone to power-on status) (Menü Tools/Poweroff.../Reset)
  - Improved Error Capturing by accessing the COM port
  - Update of FAQs and 'About' window, other colours in main window.

Version 2.7 ==> 2.9
~~~~~~~~~~~~~~~~

GENERAL:
  - Menu line in main window added
  - Options window for many settings
      - Prepaid Credit adjustable for other networks than D2
      - editable text at program termination
      - four SMS default service numbers in option window
  - Command Line support added for...
    * Setting date/time  * Sending SMS   * Doing macros  * PP Credit
  - New feature 'SimFormat' added (delets data on SIM card)
  - Information for using AT commands added
  - Internationalisation: a 3-digit Countrycode is now possible
  - GSM codes updated, RAM value added
  - Better support of non-listed Sagem phones
  - Optical improvements
  - FAQs updated and this 'What's new?' window added
  - Start-up password required once (very easy to get)

SMS:
  - New archives management for SMS
  - Messages saved in phone (unsent) no longer are skiped
  - Warning if Message starts with an asterisk('*') (optional)
  - Now supporting all 30 SMS for MC959 (10 on SIM card + 20 stored in phone)
  - Standard Messages chooseable (SMS Archiv file)

PHONE DIRECTORY:
  - Adjustable number of phone directory entries stored on SIM card
  - Sorted list available in Overview Modus.

...and some little improvements not worth mentioning.

Version 2.6 ==> 2.7
~~~~~~~~~~~~~~~~

  - Menu-Zero-Bug fixed (there was problems using some phones with a provider menu 0)
  - Better error capturing by sending SMS
  - Support of MC932 added
  - Number of directory entries on SIM card is no longer depanging on selected phone
  - General data of MC930 corrected (number additional directory entries)
  - D2 Prepaid credit service number is saved in Ini-file

Version 2.5 ==> 2.6
~~~~~~~~~~~~~~~~

  - Improved Overview Modus
  - Automatic setting of best speed (baudrate)
  - Information for Internet browsing using Sagem phone added
  - Internationalisation of phone directory added
  - User now can enter AT commands using TelMemPlus
  - Macro Editor with several standard macros added
  - Now you finally can send SMS via TelMemPlus
  - File box added in Export formular
  - Battery and receivement status added
  - Better support of MC959
  - Power-off feature added

Version 1.0 ==> 2.5
~~~~~~~~~~~~~~~~

In Version 2.0 the Phone Directory Overview Mode came and TelMem was renamed to TelMemPlus.
TelMemPlus got version 2.2 as it was published in Internet the first time.
Otherwise no changes are noticed from version 1.0 till 2.5.